Fix Your Stuff Community Store

Changes to Step #2

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Place the heated iOpener on the face of the watch.
-[* black] Leave the iOpener on the watch for at least a minute to heat the screen and soften the adhesive holding it to the case.
+[* black] [guide|11677|Prepare an iOpener] (or grab a hair dryer or heat gun ) and heat the face of the watch until it's slightly too hot to touch.
+[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.
[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.