Apple Watch Battery Replacement Step #3 History

Changes to Step #3

Edit by Andrew Optimus Goldheart — Apr 30, 2015

-	[* black] Place the curved X-acto blade perfectly in the gap between the glass and the case, nearly vertically. be sure to get the curved part in the gap to avoid cutting into the case or glass.
+	[* icon_note] Because the gap between the screen and watch body is so thin, a sharp blade is required to separate the two. *Read the following warnings carefully before proceeding.*
+	[* icon_caution] Always *keep your fingers completely clear* of the knife.
+	[* icon_caution] Be careful *not to apply too much pressure,* as this might cause the knife to slip and cut you, or damage the watch.
+	[* icon_caution] *Wear eye protection.* The knife or glass may break, sending pieces flying.

-	[* black] Place the curved X-acto blade perfectly in the gap between the glass and the case, nearly vertically. be sure to get the curved part in the gap to avoid cutting into the case or glass.
+	[* icon_note] Because the gap between the screen and watch body is so thin, a sharp blade is required to separate the two. *Read the following warnings carefully before proceeding.*
+	[* icon_caution] Always *keep your fingers completely clear* of the knife.
+	[* icon_caution] Be careful *not to apply too much pressure,* as this might cause the knife to slip and cut you, or damage the watch.
+	[* icon_caution] *Wear eye protection.* The knife or glass may break, sending pieces flying.