Fix Your Stuff Community Store

Changes to Step #2

Edit by Aidan Brown —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* black] Their will be 6 screws removed during this step, all can be removed using a small phillips screwdriver.
-[* red] Remove the 2 small screws on the side of the camera near the HDMI input panel.
-[* orange] Remove the 2 small screws on the opposite side of the camera.
-[* yellow] Remove the 2 small screws on the bottom of the camera near the tripod mounting hole.
+[* black] Removing the following 6 Phillips screws will allow access to the inside of the camera:
+[* red] Remove two screws on the right-side of the camera, near the HDMI port.
+[* orange] Remove two screws on the opposite side of the camera.
+[* yellow] Remove the last two screws on the underside of the camera, near the tripod mounting hole.