Changes to Step #2
Edit by Ben Tupas —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Remove newly exposed screw(1.75mm) with screwdriver. |
|---|---|
| - | [* black] Unhinge black tab to slide out ribbon. |
| + | [* black] Remove the newly exposed screw(1.75mm) with screwdriver. |
| + | [* black] Unhinge the black tab to slide out the ribbon. |
| [* black] The only thing keeping logic board in place is a black nub. Lift the logic board from that corner with increasing force until it pops out. |