Changes to Step #6
Edit by Erik Eriksson —
Edit approved by Aiden
- Before
- After
- Unchanged
Step Lines
| - | [* red] The battery will be glued down, so use the flat end of the spudger to pry out the battery pack. Then using your fingers, grab the wire at the connection point and unplug the battery connector. Replace the battery with a new one. |
|---|---|
| + | [* red] Disconnect the battery using tweezers or your fingernails. |
| + | [* black] The battery is glued down, if available put some isopropyl alcohol around the edges of the battery to soften the glue. |
| + | [* black] Gently pry of the battery lose using a spudger or another thin prying tool. |
| + | [* icon_caution] Be careful, damaging/puncturing the battery may cause an explosion. |