Changes to Step #1
Edit by Dante Mazzanti —
Edit approved by Dante Mazzanti
- Before
- After
- Unchanged
Step Lines
| - | [* red] Remove the seven 1.5 mm Phillips #00 screws on either side of the display assembly. |
|---|---|
| - | [* icon_note] The screw on the far right of the first image is recessed about 1 cm. |
| + | [* black] Remove the following screws: |
| + | [* red] Seven 1.5 mm Phillips #00 screws |
| + | [* icon_note] The screw on the far right of the first image is recessed about 1 cm in from the edge. |