Changes to Step #1
Edit by klondikemarlen —
Edit approved by Andrew Optimus Goldheart
- Before
- After
- Unchanged
Step Lines
| - | [* black] |
|---|---|
| + | [* black] Using the Phillips #0 screwdriver remove the following ten screws: |
| [* red] Three 14.4 mm Phillips screws | |
| [* orange] Three 3.5 mm Phillips screws | |
| [* yellow] Four 3.5 mm shouldered Phillips screws | |
| + | [* black] When reassembling apply a very small bit of glue (Loctite) to each screw to prevent them from vibrating out. |