Changes to Step #1
Edit by Andrew Optimus Goldheart —
Edit approved by Andrew Optimus Goldheart
- Before
- After
- Unchanged
Step Lines
| - | [* black] Using the Phillips #0 screwdriver remove the following ten screws: |
|---|---|
| - | [* red] Three 14.4 mm Phillips screws |
| - | [* orange] Three 3.5 mm Phillips screws |
| - | [* yellow] Four 3.5 mm shouldered Phillips screws |
| - | [* black] When reassembling apply a very small bit of glue (Loctite) to each screw to prevent them from vibrating out. |
| + | [* black] Remove the following ten screws: |
| + | [* red] Three 14.4 mm Phillips #00 screws |
| + | [* orange] Three 3.5 mm Phillips #00 screws |
| + | [* yellow] Four 3.5 mm shouldered Phillips #00 screws |