Fix Your Stuff Community Store

Changes to Step #3

Edit by Evan Noronha —

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
-[* icon_caution] Be careful when pulling. Pulling too hard may damage the display assembly. Pull just enough to create a small gap between the display assembly and the rear case.
+[* icon_caution] Pulling too hard may damage the display assembly. Apply just enough pressure to create a small gap between the display assembly and the rear case.