Changes to Step #3
Edit by Mark Schefter —
Edit approved by Mark Schefter
- Before
- After
- Unchanged
Step Lines
| - | [* red] Remove the 1/4" Phillips #02 screw between the fan and the motor. You may need to rotate the fan to find the screw. |
|---|---|
| + | [* red] Remove the 1/4" Phillips #02 screw between the fan and the motor, located at the bottom of the fan. |
| + | [* icon_note] You may need to rotate the fan to find the screw. |
| [* icon_note] Upon reassembly, make sure that the notched part of the motor axle (blue square) lines up with the screw hole on the fan blade. |