Changes to Step #2
Edit by Starfire 213 —
Edit approved by Kyle Smith
- Before
- After
- Unchanged
Step Lines
| [* icon_caution] Take extra caution with these screws as they can strip easily! | |
| + | [* icon_note] It is recommended that you use a Flexible Extension to minimize stripping |
| [* black] Remove the following 3 screws from the rear wall of the battery compartment: | |
| [* red] One 3 mm Phillips #0. (Head: 2.75 mm. dia.) | |
| [* orange] Two 4 mm Phillips #0 on the either side. (Head: 2.75mm dia.) |