Changes to Step #17
Edit by Andrew Bookholt —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Pull the right edge of the logic board slightly away from the rear case to dislodge the rear I/O ports from their bezel. |
| + | [* black] Tilt the top edge of the board away from the rear case and lift the logic board assembly out of the rear case, minding any cables that may get caught. |
| + | [* icon_reminder] When reinstalling the logic board, it is helpful to use tape to temporarily tuck the cables out of the way until the board is properly seated in the rear case. |