Changes to Step #8
Edit by Jesse Johnson —
Edit approved by Jesse Johnson
- Before
- After
- Unchanged
Step Lines
| - | [* red] Use needle |
|---|---|
| + | [* red] Use needle-nose tweezers to gently lift the black/grey latch towards the ribbon-wire (the latch rotates upward to release and snaps down to lock). |
| [* icon_caution] Be careful not to break the latch. It cannot be replaced. | |
| [* black] Use tweezers to gently remove ribbon-wires. | |
| [* black] Pull the ribbon-wires towards the back-end of the camera. |