Changes to Step #10
Edit by Jesse Johnson —
Edit approved by Jesse Johnson
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use needle-nose tweezers to remove the large wire ribbon located under the screw. Gently wiggle the ribbon out in an upward motion. |
|---|---|
| + | [* black] Use needle-nose tweezers to remove the large ribbon-wire located under the screw. |
| + | [* black] Gently wiggle the ribbon out in an upward motion. |
| [* icon_note] For easier access, you can push the black surface of the camera where the buttons and dials are located. Do not push too hard as this may break the plastic. |