Changes to Step #5
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| - | [* black] Disconnect the black fan connector and two temperature sensor connectors from the logic board by pulling/prying them directly up. Don't try to slide the connector plugs out of their sockets, in the same plane as the logic board, since that may break them. |
|---|---|
| + | [* black] Disconnect the black fan connector and two temperature sensor connectors from the logic board by pulling/prying them directly up. |
| + | [* icon_note] Don't try to slide the connector plugs out of their sockets, in the same plane as the logic board, since that may break them. |
| [* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn/Early 2009, there is only one temperature sensor. | |
| [* icon_reminder] The heat sink in early 2009 MacBooks may look slightly different. |