Changes to Step #6
Edit by Dan —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Disconnect the three antenna cables from the Airport card, and the black inverter cable from the logic board. |
|---|---|
| - | [* icon_note] The inverter cable connector may be covered by a small piece of foam tape. Remove this cube before disconnecting the connector. |
| + | [* black] Disconnect the three antenna cables from the Airport card. |
| [* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there are only two antenna cables and the black inverter cable is in a different location. |