Fix Your Stuff Community Store

Changes to Step #2

Edit by goldenkenneth —

Pending approval

Before
After
Unchanged

Step Lines

[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
-[* black] Insert a metal spudger into the seam between the silver front bezel and the black display assembly on the edge closest to the home button. Gently pry the display assembly up from its bezel.
+[* black] (If you don't have a suction cup then try a piece of wide packing or scotch mailing tape.)