Fix Your Stuff Community Store

Changes to Step #2

Edit by gibby420 —

Pending approval

Before
After
Unchanged

Step Lines

[* black] Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.
-[* icon_caution] Be very careful when opening the iPhone so that the cables under the display are not severed.
-[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
-[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
-[* icon_note] If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape may be used.
+[* icon_caution] Be very careful when opening the Black Double-Donger so that it's not severed.
+[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the Black Double-Donger's assembly.
+[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the Black Double-Donger's assembly.
+[* icon_note] If the Black Double-Donger assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape may be used.