Changes to Step #2
Edit by David Mitchell —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle. |
|---|---|
| + | [* black] Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle. Use a strip of duct tape on the other end as a sort of hinge, to avoid yanking out the connectors abruptly. |
| [* icon_caution] Be very careful when opening the iPhone so that the cables under the display are not severed. | |
| - | [* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly. |
| + | [* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly. There is no glue used here. |
| [* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly. | |
| [* icon_note] If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape may be used. |