Fix Your Stuff Community Store

Changes to Step #2

Edit by Dennis —

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.
+[* black] Remover o identificador de metal da taça de sucção. É mais fácil e seguro para segurar a base da ventosa em vez de a alça de metal.
[* icon_caution] Be very careful when opening the iPhone so that the cables under the display are not severed.
[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* icon_note] If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape may be used.