Changes to Step #11
Edit by iRobot —
- Before
- After
- Unchanged
Step Lines
| + | [* black] Remove the following 8 screws: |
|---|---|
| + | [* red] Five 2.3 mm Phillips #00 screws with partial threads securing the logic board to the rear panel. |
| + | [* orange] Two 2.3 mm Phillips #00 screws with full threads securing the logic board and camera. |
| + | [* yellow] One 2.9 mm Phillips #00 screw from beneath the "Do not remove" sticker. |
Image 1
No previous image
Added