Fix Your Stuff Community Store

Changes to Step #11

Edit by miqueiasmiller —

Pending approval

Before
After
Unchanged

Step Lines

[* black] Remove the following 8 screws:
[* red] Five 2.3 mm Phillips #00 screws with partial threads securing the logic board to the rear panel.
- [* orange] Two 2.3 mm Phillips #00 screws with full threads securing the logic board and camera.
+ [* orange] Two 2.3 mm Phillips #00 screws with full threads securing the logic board and camera. There's a little metallic piece that is used to fix the camera which is fixed by the most right-bottom screw.
[* yellow] One 2.9 mm Phillips #00 screw from beneath the "Do not remove" sticker.