Changes to Step #13
Edit by David Mitchell —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector. |
|---|---|
| + | [* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector. There is a tiny, gold grounding strap at the case, an inch below the spudger in the photo. It is soldered to the logic board. I cut it at the metal rim with a razor blade. On reassembly, it rests against the case, and my phone works fine. Maybe I was lucky. |
| [* icon_note] If the board won't lift up, double check to make sure all the screws securing the logic board have been removed. |