Changes to Step #4
Edit by Roger —
Edit approved by Jake Devincenzi
- Before
- After
- Unchanged
Step Lines
| [* black] Remove following two screws: | |
| + | [* black] Take care! These screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments on the right before proceeding. |
| [* red] One 8.6 mm Phillips screw | |
| [* orange] One 3.9 mm Phillips screw | |
| [* black] Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case. |