Changes to Step #2
Edit by Joseph Rockcliffe —
Edit approved by Joseph Rockcliffe
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use the plastic separating tool to separate the back cover from the device. Insert into the crack between the two and move the tool up and down. Work your way around all sides until the cover is able to be removed. |
|---|---|
| + | [* black] Use the large plastic opening tool to separate the back cover from the device. Wedge the sharp end of the tool into the crack and use leverage to further separate the back cover from the device. |
| + | [* black] Still holding pressure on the opening tool, slowly and carefully slide the tool along the gap to separate it further. You should hear slight snapping as it comes apart. Work your way around all sides until the cover is able to be removed. |