Fix Your Stuff Community Store

Changes to Step #1

Edit by Kristen Gismondi —

Edit approved by Kristen Gismondi

Before
After
Unchanged

Step Lines

-[* red] Look at the side of the speaker that has the red interface plate. Using a Phillips head PH1 screwdriver head, remove screws on the top and bottom of the black face plate. There will be one screw on top and one on the bottom.
- [* red] Both screws will 0.55 cm in depth
+[* black] Look at the side of the speaker that has the red interface plate. Using a Phillips head PH1 screwdriver head, remove screws on the top and bottom of the black face plate. There will be one screw on top and one on the bottom.
+ [* black] Both screws are 0.55 cm in depth