Skip to main content

Changes to Step #1

Edit by Clay Eickemeyer

Edit approved by Clay Eickemeyer

Before
After
Unchanged

Step Lines

[* black] Grab the clear plastic pull tab attached to the battery connector and pull it toward the front edge of the Air to disconnect the battery from the logic board.
[* icon_caution] Do not lift upward on the connector as you disconnect it.
-[* black] Note: when attaching the new battery, it may be easier to push the connector in to the logic board before placing the new battery in position. You may also need to press down on the connector after it is attached, so that it is not curled upwards.
+[* icon_reminder] When reinstalling a new battery, it may be helpful to temporarily reconnect the battery before placing it in the frame. Make sure that the connector lays flat to the board.