Changes to Step #2
Edit by Evan Noronha —
Edit approved by Evan Noronha
- Before
- After
- Unchanged
Step Lines
| + | [* icon_note] Lift the display up enough to have easy access to the connector, but not so much that you stretch the cables and stress their connections (about 8"). |
|---|---|
| [* black] While holding the display up with one hand, use a pair of tweezers to flip up the metal retaining bracket on the display data cable. | |
| [* black] Carefully pull the display data cable from its socket on the logic board. | |
| [* icon_caution] Be sure to pull the display data cable connector straight out of its socket. |