Changes to Step #3
Edit by Evan Noronha —
Edit approved by Evan Noronha
- Before
- After
- Unchanged
Step Lines
| + | [* black] Insert the tip of a spudger between the right speaker and the antenna cable that is routed into the speaker's right side. |
|---|---|
| + | [* black] Run the spudger down along the right side of the speaker to pry the antenna cable from its channel in the right speaker. |
| + | [* icon_note] If the channel is not easily accessible, you can pull the speaker gently away from the case to gain access to the antenna cable. |
| + | [* icon_caution] ***IS THIS NECESSARY IN THIS MODEL?*** |