Fix Your Stuff Community Store

Changes to Step #3

Edit by Jeff Suovanen —

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Insert the tip of a spudger between the right speaker and the antenna cable that is routed into the speaker's right side.
-[* black] Run the spudger down along the right side of the speaker to pry the antenna cable from its channel in the right speaker.
-[* icon_note] If the channel is not easily accessible, you can pull the speaker gently away from the case to gain access to the antenna cable.
+[* black] Run the spudger down the right side of the speaker to de-route the antenna cable from its channel in the right speaker.
+[* icon_note] If the channel is not easily accessible, you can tip the speaker slightly forward (away from the rear case) to gain access to the antenna cable.