Fix Your Stuff Community Store

Changes to Step #5

Edit by Darcy Patko —

Edit approved by Scott Havard

Before
After
Unchanged

Step Lines

-[* red] Locate the plastic fitting hooked within the steel housing of the engine.
+[* red] Locate the plastic fitting hooked to the steel housing of the engine.
[* black] To the left of the fitting, you will see a steel sliding mechanism connected by a spring.
[* black] Squeeze the mechanism together to allow for slack in the cable wire.
[* icon_note] You might need to use pliers or clamps in order to squeeze the plates together.