Changes to Step #3
Edit by Evan Noronha —
Edit approved by Evan Noronha
- Before
- After
- Unchanged
Step Lines
| + | [* black] While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad. |
|---|---|
| + | [* icon_caution] Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD. |
| + | [* black] Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly. |