Changes to Step #2
Edit by Sales Cameraparts4you —
Edit approved by Sales Cameraparts4you
- Before
- After
- Unchanged
Step Lines
| + | [title] Releasing wire |
|---|---|
| + | [* yellow] Release the socket. It would be best to use a method that does not require pulling on the wires. |
| + | [* red] One way to release the socket is by carefully inserting a thin wedge between the male and female sockets and carefully pry them apart. |
| + | [* icon_caution] If you are using a sharp object be careful around the wires. Any slip can cut the wires. To prevent any ESD damage please do not touch any part of your circuit board with your bare hands or tools. Use nitrile gloves or an esd device. |
| + | [* violet] Remove 1 silver screw (0.4mm) next to joy stick. |
| + | [* green] Remove 1 silver blue tip coated (0.4mm) screw bottom left corner. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added