Changes to Step #8
Edit by Sarah Pierce —
Edit approved by Sarah Pierce
- Before
- After
- Unchanged
Step Lines
| + | [title] Examine & Test |
|---|---|
| + | [* black] Examine the contact pads for corrosion. |
| + | [* black] To test if the corrosion is causing bad contacts |
| + | [* black] Place good batteries in the back of the case (proper direction) |
| + | [* black] Lay the circuit board over the batteries (4 little posts will align them) |
| + | [* black] Press down a little over the batteries to make sure they have a good connection (if necessary) |
| + | [* black] Tap a screwdriver to short the "ON" contact pad (top right) |
| + | [* black] If the display comes on, then the corrosion is the problem |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added