Changes to Step #8
Edit by David Van Matre —
- Before
- After
- Unchanged
Step Lines
| - | [* icon_caution] Rotate the printer 180 degrees. Be careful, the feed roller assembly is now only loosely connected to the printer base and it can easily slip or slide, damaging the printer. |
|---|---|
| + | [* icon_caution] Rotate the printer 180 degrees and turn it up on to the front side, so that the back of the printer is facing up and the bottom facing you. Be careful, the feed roller assembly is now only loosely connected to the printer base and it can easily slip or slide, damaging the printer. |
| [* red] Push in the tab on the left side of the back panel and pull outward to remove the back panel. |