Changes to Step #1
Edit by John Toncich III —
Edit declined by Jake Devincenzi
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following screws securing the battery connector to the logic board: | |
| - | [* red] One 1.7 mm Phillips screw |
| - | [* orange] One 1.5 mm Phillips screw |
| + | [* red] One 1.7 mm Phillips screw. using the J000 bit |
| + | [* orange] One 1.5 mm Phillips screw. using the J000 bit |