Fix Your Stuff Community Store

Changes to Step #4

Edit by Scott Havard —

Edit approved by Scott Havard

Before
After
Unchanged

Step Lines

-[* black] Carefully pry up the remaining, bottom portion of the press connector, which is lightly adhered to the home/Touch ID sensor cable beneath.
- [* icon_caution] Don't try to detach the press connector completely—simply separate the adhesive holding it in place.
+[* black] Use an opening pick to gently lift the press connector off of the home/Touch ID sensor cable beneath.
+ [* icon_caution] Don't try to detach the press connector completely—simply lift it up so that it is out of the way when removing the home/Touch ID sensor cable.