Changes to Step #2
Edit by Tyler Starr —
Edit approved by Tyler Starr
- Before
- After
- Unchanged
Step Lines
| [* black] Lift the top edge of the lower case slightly off on the 3DS. | |
| - | [* icon_caution] |
| + | [* icon_caution] Don't pull the lower casing completely off, you may break those connections. There are ribbon cables that must be disconnected first. |
| [* black] Pry the ribbon cable socket under the right trigger using a plastic opening tool. | |
| - | [* black] Pry the ribbon cable socket under the infrared recover using a plastic opening tool. |
| - | [* black] Open the device slowly from its top edge. Be careful not to tug the ribbon cable connected near the bottom edge of the device. |
| - | [* black] Pry the last ribbon cable attached to the lower case using a plastic opening tool. |
| + | [* black] Pry the ribbon cable socket under the infrared receiver cover using a plastic opening tool. |