Fix Your Stuff Community Store

Changes to Step #4

Edit by Tyler Starr —

Edit approved by Tyler Starr

Before
After
Unchanged

Step Lines

-[* icon_caution] Double check that all logic board connection on the top of the board have been disconnected.
-[* red] Remove the three, 3mm Phillips #00 screws that secure the logic board to the device housing.
+[* icon_caution] Double check that all motherboard connection on the top of the board have been disconnected.
+[* red] Remove the three, 3mm Phillips #00 screws that secure the motherboard to the device housing.
[* icon_note] One screw on this device is missing.
-[* orange] Lift the logic board genlty by the headphone jack. Remove the two ribbons on the back of the device by lifting the retaining tabs on the ZIF connectors.
+[* orange] Lift the motherboard genlty by the headphone jack. Remove the two ribbons on the back of the device by lifting the retaining tabs on the ZIF connectors.