Fix Your Stuff Community Store

Changes to Step #9

Edit by Walter Galan —

Pending approval

Before
After
Unchanged

Step Lines

[* black] Use the edge of a plastic opening tool to gently pry up the display assembly around its perimeter.
[* black] Remove the display assembly from the iPhone.
[* icon_caution] When reinstalling the display assembly, be sure the digitizer and display data cables are completely pulled through the slot cut into the outer case before pressing the display assembly down into the outer case. Failure to do so will cause the digitizer cable to not reach its socket on the logic board.
+[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector].