Fix Your Stuff Community Store

Changes to Step #9

Edit by Brett Hartt —

Pending approval

Before
After
Unchanged

Step Lines

[* black] Use the edge of a plastic opening tool to gently pry up the display assembly around its perimeter.
[* black] Remove the display assembly from the iPhone.
-[* icon_caution] When reinstalling the display assembly, make sure the digitizer and display data cable are completely pulled through the slot before pressing the display assembly into the outer case. Otherwise the digitizer cable wont reach to its socket on the logic board and you risk to brick the digitizer by introducing a sharp bend to the cable.
+[* icon_caution] When reinstalling the display assembly, make sure the digitizer and display data cable are completely pulled through the slot cut into the outer case. Otherwise, the digitizer cable will not reach to its socket on the logic board.
[* icon_note] Remember to switch the home button from your old display to the new display (most cases this is not provided)
[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector].