Fix Your Stuff Community Store

Changes to Step #11

Edit by ndavis9743 —

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[title] Display Assembly Installation (Cont'd)
[* icon_reminder] Whether installing a replacement display assembly or re-using the existing display assembly, note the following:
[* black] Carefully straighten the digitizer and LCD data cables, and feed them through the slot cut in the outer case. [https://d3nevzfk7ii3be.cloudfront.net/igi/pOnFkdECiyCBgkjU|This photo|new_window=true] shows the display assembly being installed ***incorrectly***, with a fold in the digitizer cable.
- [* icon_note] The photo on the left shows the digitizer cable being correctly fed through to its full length.
+ [* icon_note] The photo on the right shows the digitizer cable being correctly fed through to its full length.
[* icon_caution] If the digitizer cable has been installed incorrectly, it will not reach its socket on the logic board. ***Do not*** attempt to pull it through by force, or it will tear. Remove the display assembly, straighten the cable, and feed it through correctly.