Fix Your Stuff Community Store

Changes to Step #1

Edit by Michael Spearman —

Edit approved by Michael Spearman

Before
After
Unchanged

Step Lines

[* icon_note] Shutdown your computer and remove the battery before beginning the replacement.
-[* red] You will need to loosen the two 7mm long screws holding down the hard drive bay panel.
-[* icon_note] The two screws will not come out completely but will stay on the panel when removed.
+[* red] Loosen the screws using Phillips #01 screwdriver.
+[* icon_note] The screws will not come out completely but stay on the panel.