Changes to Step #6
Edit by jacquesfforster —
Edit declined by Sam Goldheart
- Before
- After
- Unchanged
Step Lines
| + | [title] Image is "reverse" (mirror it) |
|---|---|
| [* black] If present, peel the piece of black tape covering the hidden screw near the power button. | |
| [* red] Remove the 2.6 mm Phillips screw securing the logic board near the power button. | |
| [* icon_caution] (Use caution when removing this screw and removing the power contact held by it; the contact tab will come loose with the screw) | |
| [* icon_note] Notice the small rubber bumper under the screen & digitizer cables (which are detached at top above the Q-code). This bumper can fall off of the logic board when removed or get stuck to the cables and fall off later. |