Changes to Step #7
Edit by Dominik Schnabelrauch —
Edit approved by Dominik Schnabelrauch
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following screws securing the logic board to the case: | |
| [* red] One 2.5 mm Phillips screw near the vibrator motor | |
| [* orange] One 2.4 mm Phillips screw | |
| [* yellow] One 3.6 mm standoff along the side of the logic board nearest the battery opening. | |
| - | [* icon_note] Use a [product|IF145-343|standoff driver bit|new_window=true] or a small flathead screwdriver to remove the single 3.6 mm standoff screw. |
| + | [* icon_note] Use a [product|IF145-343|standoff driver bit|new_window=true] and [product|IF145-326|driver handle|new_window=true] to remove the single 3.6 mm standoff screw. |
| + | [* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components. |