Changes to Step #8
Edit by Patrick Worth —
Edit approved by Walter Galan
- Before
- After
- Unchanged
Step Lines
| [* black] Carefully lift the logic board from the end closest to the speaker enclosure and slide it away from the top edge of the iPhone. | |
| [* black] Remove the logic board. | |
| [* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the logic board (***not*** the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause grounding issues. | |
| + | [* black] There is a small rubber bumper that sits on the top edge of the logic board where the digitizer and screen cables come through the case. It protects the cables as they bend over the top of the logic board. This can either get stuck to the cables or fall off the logic board when it comes out. It is pictured well in step 6's photo. |