Fix Your Stuff Community Store

Changes to Step #5

Edit by Jeremy Harton —

Edit approved by Blake Klein

Before
After
Unchanged

Step Lines

-[* black] Now don't go immediately taking off the mother board because there is a orange film at the top that needs to be taken out first.
-[* black] All you have to do is look at the sides of it carefully and there is going to be two brown little peices of plastic that need to be lossened not taken out
-[* black] use either your finger nail or something small that is a hard plasitic or metal not something bendable.
-[* black] And it will just slide out by a little bit of force but be careful when sliding it out.
+[* black] Now don't go immediately taking off the mother board because there is a orange film (this is the LCD ribbon cable) at the top that needs to be taken out first.
+[* black] All you have to do is look carefully at each side of it. There are two little pieces of brown plastic that need to be loosened, but not taken out.
+[* black] Using either your fingernail or something small and stiff, preferably made of hard plastic or metal that won't bend, gently push the brown pieces in the direction of the orange film.
+[* black] The cable will just slide out with a little bit of force, but be careful not to tear or bend the cable when sliding it out.