Changes to Step #2
Edit by Alex Miller —
Edit approved by Alex Miller
- Before
- After
- Unchanged
Step Lines
| + | [* red] Lift the small tab on the security flaps up and peel them across the battery. They will be attached via adhesive. |
|---|---|
| + | [* red] Pull the tab on the opposite end of the strip and remove the entire strip. |
| + | [* orange] Push the black plastic security flap into an upward position. |
| + | [* yellow] Lift the tab on the strip up and pull it across the battery. |
Image 1
No previous image
Added