Fix Your Stuff Community Store

Changes to Step #2

Edit by Ani Svadjian —

Edit approved by Dan

Before
After
Unchanged

Step Lines

-[* black] Completely separate the back cover from the rest of the camera. Carefully set aside this back cover.
-[* black] Then, unscrew the four screws fastening the front outer cover to the camera (see image #2 for screw locations).
-[* black] When these screws are removed, use a spudger to carefully pry the front outer cover away from the camera. Do this gently to avoid damaging the yellow and black wires connecting the front outer cover to the camera.
+[* black] Completely separate the back cover from the rest of the camera. Set the back cover aside.
+[* black] Remove 4 screws from the front outer cover to the camera (see image #2 for screw locations).
+[* black] Use a Spudger to pry the front outer cover away from the camera. Do this gently to avoid damaging the yellow and black wires connecting the front outer cover to the camera.