Changes to Step #2
Edit by Phillip Takahashi —
- Before
- After
- Unchanged
Step Lines
| + | [* black] Carefully lay the iMac stand-side down on a flat surface. |
|---|---|
| + | [* icon_note] Due to tight tolerances, you will have to use a thin hooked tool to lift the display out of the outer case. As seen in the third picture, we made one out of a bent paperclip. |
| + | [* black] Use a thin hooked tool to lift one side of the top edge of the display by its steel outer frame. |
| + | [* icon_note] After lifting the top edge of the display on one side, hold it out of the outer case while you use a hooked tool to lift the other side. |
| + | [* icon_caution] Do not lift the top edge of the display out of the outer case too far, as several short ribbon cables still connect the two components. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added